The best way to clean hot tub filters
The best way to clean hot tub filters
Having your own hot tub is an excellent way to relax and unwind. The last thing you want to do while relaxing is think about how dirty the water is. Every time someone gets into the hot tub with lotion on their body, wearing make-up or with styling products in their hair, the water quality deteriorates. To remove these products from the body, a shower before getting into the hot tub is therefore recommended. Even so, hair, sweat and other body fluids find their way into the water, affecting its purity.
For this reason, the filter is one of the most important parts of a hot tub. Its job is to remove any contaminants from the water that could affect water quality. But a dirty filter with a lot of build-up cannot filter the water efficiently. This leads to various problems, such as dirty or oily water and the multiplication of bacteria. It can even result in a broken hot tub if the water is excessively dirty and overloads the pumps or clogs the pipes.
Fortunately, there are many options for cleaning hot tub filters, such as: cleaning with vinegar, using a specific product for cleaning filters of this kind, or cleaning them in the dishwasher. Keep your hot tub sanitised and functional in the long term by using the best way to clean its filters.
Weekly rinsing
To extend the life of hot tubs, the filters must be cleaned consistently. Remove the filter and rinse it with water every week to remove residue. Do not use a high-pressure washer to remove the build-up on the filter. The water flow must be gentle enough to prevent it from tearing or being damaged. Then let the filter dry completely before reinstalling it in the hot tub.
Deep cleaning of the filters at regular intervals
In addition to weekly rinsing, a more thorough cleaning is recommended every month or even more often, as necessary. Deep cleaning involves removing the filter and using a specific cleaning solution to remove the accumulated residue and the contaminants that require more than a rinse.
The steps to follow when cleaning filters
The following steps are the best way to clean hot tub filters:
Prepare the hot tub filter cleaning solution. Prepare this solution so that you can quickly place the filter in it after removing it from the spa. Use a bucket large enough for the filter to be submerged. Fill it with water and add either a DIY cleaning solution or a specific solution intended for cleaning hot tub filters. Spa Marvel Filter Cleaner is designed specially for the thorough and safe cleaning of hot tub filters. For the best results, use the appropriate water ratio when preparing the spa filter cleaning solution.
Consult the owner's manual. If this is the first time you are cleaning your spa filter or you need a refresher, consult your spa manual. It will show you the location of the filter along with instructions for removing it safely.
Switch off the hot tub. Never run the hot tub without a filter, as this can cause the pump to run clogged and the water quality to deteriorate.
Remove the filter and check for problems. If the filter is discoloured or shows visible damage, throw it away and replace it with a new filter.
Rinse and remove visible build-up. Before soaking the filter, rinse it and check gently between the pleats for debris that can be removed by hand, such as hair, small twigs or leaves.
Soak the filter in the hot tub filter cleaning solution. For the best clean, leave the filter to soak overnight. (If you are cleaning the tub filter with bleach, it should only soak for a few hours.)
Rinse the filter again. Spray water with enough pressure to clean off any residue remaining on the filter.
Replace the filter. If the filter is clean, let it dry completely. Then follow the instructions in the owner's manual to install the filter in the hot tub.